Superior Evaporants Incorporated
Product Form: 2 – 8 mm shot
Melting point: 961.93 oC
Density @ 293 K: 10.5 g/cm3
Properties of thin film:
Hints on evaporation:
Substrate temperature ~ ambient
Deposition rate ~ 100nm/10 seconds
Evaporate using E‑Beam with graphite liner or W boat.
Package in dry Nitrogen after deposition as film will degrade as soon as it hits O2. If adhesion is a problem, put down a small Cr layer first.
Visible and I.R. mirrors,